Shepler's Performance Products

Shepler’s Performance Products, exclusively distributed by CMC Construction Services, are a complete line of quality construction products including bondbreakers, release, cures, sealers, grouts, repair products, epoxies and joint sealants. Shepler’s Performance Products deliver solutions for current trends and contractors’ specifications.

Grout  |  Epoxies  |  Patching Materials  |  Cures & Sealers  |  Form Release  |  Bondbreakers

Grout
SHEP 1107 PREMIUM GROUT
Technical Data Sheet | MSDS | LEED Letter
Shep 1107 Premium Grout is designed for critical use where high strength, non-staining characteristics and positive expansion are required. It contains only natural aggregate and an expansive cementitious binder. It is extremely flowable, and when cured, appears similar in appearance to concrete.
^ Back to Top
Joint Sealants
SHEP SELECT SELF-LEVELING
Shep Select Self-Leveling is a one part urethane sealant for sealing and protecting moving joints of all types.

SHEP SELECT NON-SAG
Shep Select Non-Sag is a one part urethane sealant for sealing and protecting moving joints of all types.
^ Back to Top

Epoxies
SHEP POXY HI MOD GEL
Technical Data Sheet | MSDS | LEED Letter
Shep Poxy Hi Mod Gel is a multi-purpose, two component, 100% solids, moisture tolerant epoxy resin compound for load bearing applications.

SHEP POXY HI MOD FAST GEL
Technical Data Sheet | MSDS | LEED Letter
Shep Poxy Hi Mod Fast Gel system is a two part, 100% solids, moisture insensitive adhesive and binder for numerous application needs. This high modulus material is available in a gel consistency. Shep Poxy Hi Mod Fast Gel products are high strength, extremely fast setting (even in a thin film) adhesives and can be used at temperatures as low as 35°F (2°C).
^ Back to Top

Patching Materials

Please choose your region for a complete listing of patching materials in your area.

Click here to display map for region choice.

SHEP PATCH PLUS
Technical Data Sheet | MSDS | LEED Letter
Shep Patch Plus is a two component polymer modified concrete repair and underlayment material. The Shep Patch Plus liquid is a high solids content acrylic polymer. The Shep Patch Plus Powder is a Portland cement based mix with graded silica and special chemical additives. Polymer modified concrete gives improved bonding, improved chemical resistance, improved water resistance and improved tensile, compressive and flexural strength.

SHEP CRETE
Technical Data Sheet | MSDS | LEED Letter
Shep Crete is a Portland Cement-based product with graded silica aggregates and special chemical additives for bonding, hardening and moisture retention. It is formulated for smoothing, rubbing and thin coat patching applications. Shep Crete has a smooth, rich texture making it simple and easy to apply. After curing, it is not water sensitive, it has the setting and curing properties of regular concrete.

SHEP DAMM-IT
Technical Data Sheet | MSDS | LEED Letter
Shep Damm-It is a quick setting hydraulic cement compound used to instantly stop running water or seepage leaks in masonry or concrete. Shep Damm-It is ready to use and requires only the addition of water before plugging and sealing cracks.

SHEP ROCK
Technical Data Sheet | MSDS | LEED Letter
Shep Rock is a scientifically formulated non-metallic pourable anchoring cement and grout. It is rapid setting and expansive. Shep Rock is a non-shrink hydraulic cement with controlled expansion. It will self level when mixed with water to a pourable consistency. Shep Rock is non-rusting and contains no ferrous metals. Its controlled expansion grips the material to be anchored, locking it into place.

SHEP WELD
Technical Data Sheet | MSDS | LEED Letter
Shep Weld is a non-reemulsifiable architectural quality acrylic latex emulsion for interior or exterior use as a bonding agent admixture for concrete repair, leveling, grouts, thin sets and mortar beds or rubbing applications. It is suitable for making repairs above and below grade.

SHEP WELD PLUS
Technical Data Sheet | MSDS | LEED Letter
Shep Weld Plus is a ready use, film forming, one-time re- emulsifiable liquid bonding agent and polymer modifier for concrete. It may be used inside or outside as a bonding agent admixture for concrete repair, leveling, grouts, thin sets and mortar beds or rubbing applications. Shep Weld Plus is an excellent surface bonder and may be used above or below grade.
^ Back to Top

Click here to display map for region choice.

SHEP PATCH PLUS
Technical Data Sheet | MSDS (powder) | MSDS (liquid) | LEED Letter
Shep Patch Plus is a two component polymer modified, cementitious repair mortar and underlayment.

SHEP CRETE
Technical Data Sheet | MSDS | LEED Letter
Shep Crete is a single component, polymer modified, portland cement based material used for achieving a smooth finish on precast, poured in place, tilt up or other unfinished or damaged concrete surfaces.

SHEP DAMM-IT
Technical Data Sheet | MSDS | LEED Letter
Shep Damm-It is a quick setting hydraulic cement compound used to instantly stop running water or seepage leaks in masonry or concrete. Shep Damm-It is ready to use and requires only the addition of water before plugging and sealing cracks.

SHEP ROCK
Technical Data Sheet | MSDS | LEED Letter
Shep Rock is a pourable, fast setting hydraulic cement designed for anchoring or grouting applications. Shep Rock sets in less than 10 minutes and rapidly achieves load bearing and bond strength properties. It does not contain any metallic aggregate or any chloride ions.

SHEP WELD
Technical Data Sheet | MSDS | LEED Letter
Shep Weld is a non-redispersable, liquid bonding admixture used to produce polymer modified concrete and mortar. Shep Weld is a milky white, water based emulsion of high solids acrylic polymers and modifiers. Shep Weld is non-yellowing, and has excellent resistance to ultraviolet degradation, heat and most common chemicals. Shep Weld does not alter the color of the mixture.

SHEP WELD PLUS
Technical Data Sheet | MSDS | LEED Letter
Shep Weld Plus is an aqueous, non-oxidizing, ready-touse, high build, film forming, re-emulsifiable, liquid bonding agent, used for bonding new cementitious materials to clean, structurally sound, existing surfaces. Fresh applications of Shep Weld Plus are moisture sensitive. When new concrete, plaster, mortar, terrazzo, or other cementitious or gypsum material is applied to the Shep Weld Plus coated surface, the Shep Weld Plus rewets and develops a tenacious mechanical, adhesive, and chemical bond between the new material and old surface. The bond is completed when the newly applied material cures.
^ Back to Top

Cures & Sealers
SHEP CURE & HARD
Technical Data Sheet | MSDS | LEED Letter
Shep Cure & Hard concrete curing compound was specially formulated to provide the contractor with a good, general purpose curing compound for construction applications where economy is of prime importance. It contains no wax, resin or solvents. Shep Cure & Hard meets maximum VOC content limits of 100 g/L for Concrete Curing Compounds as required by SCAQMD Rule 1113. 

SHEP CURE 309 REZ ALL
Technical Data Sheet | MSDS | LEED Letter
Shep Cure 309 Rez All water-based concrete curing compound is formulated from hydrocarbon resins and may be used on interior, exterior, vertical, and horizontal concrete surfaces. Once applied, Shep Cure 309 Rez All forms a liquid membrane that retains an optimum amount of water in freshly placed concrete for complete hydration of the cement. 

SHEP CURE 309 CITY WHITE
Technical Data Sheet | MSDS | LEED Letter
Shep Cure 309 City White water-based, white-pigmented concrete curing compound is a waxbased dispersion with selected white pigments. When properly applied, Shep Cure 309 City White forms a premium-grade membrane, which optimizes water retention. The white pigment reflects the sun’s rays to help keep the concrete surface cooler and prevent excessive heat buildup. 

SHEP SEAL 1315 UV
Technical Data Sheet | MSDS | LEED Letter
Shep Seal 1315 UV acrylic curing and sealing compound is a clear, transparent, ready-to-apply, non-yellowing liquid compound formulated from special acrylic polymers and quick-evaporating solvents that effectively cures and seals freshly placed concrete. Shep Seal 1315 UV meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule. 

SHEP SUPER CLEAR COAT
Technical Data Sheet | MSDS | LEED Letter
Shep Super Clear Coat acrylic curing and sealing compound offers a 30% solids content. It is a clear, transparent, ready to - apply, non-yellowing liquid compound formulated from special acrylic polymers and quick-evaporating solvents that effectively cures and seals freshly placed concrete. Shep Super Clear Coat meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule. 
^ Back to Top

Form Release
SHEP FARM FRESH
Technical Data Sheet | MSDS | LEED Letter
100% natural, organic chemical release agent. Ideal for sensitive environmental situations such as bridge formwork over rivers and streams or potable water reservoirs. Shep Farm Fresh provides quick, easy release and leaves an architectural bondable concrete surface.

SHEP PREMIUM RELEASE
Technical Data Sheet | MSDS | LEED Letter
A general use, premium type release agent for use on steel, aluminum, plywood and composition forms. Composed of organic chemicals that react with the concrete to prevent adhesion and provide quick and easy release. An excellent value for the money. Concrete is left with an architectural surface or ready for application of curing compound or sealer, or bondable for plaster, mastics, paint, etc.
^ Back to Top

Bondbreakers
SHEP 2000F
Technical Data Sheet | MSDS | LEED Letter
In contrast to most conventional cure and bondbreakers, Shep 2000F does not contain any wax or hydrocarbon resins and, as a result, does not depend on a physical barrier deposited on top of the casting slab to prevent bonding. Instead, Shep 2000F consists of a special formulation of chemically reactive organic compounds in a predominately water based solvent system which chemically react with calcium hydroxide, a byproduct of the cement hydration reaction, present in the concrete surface pores

SHEP CURE & TILT PLUS SB
Technical Data Sheet | MSDS | LEED Letter
Shep Cure & Tilt Plus SB is a reactive and membrane forming bondbreaker for use in tilt wall construction. Shep Cure & Tilt Plus SB is a special formula of polymers and propriety ingredients designed to provide clean, easy lifting of tilt panels. Shep Cure & Tilt Plus SB has a fugitive dye for ease of visual inspection during application and is also available without the dye upon special request.

SHEP CURE & TILT PLUS WB
Technical Data Sheet | MSDS | LEED Letter
Shep Cure & Tilt Plus WB is a long chain chemically reactive bondbreaker for tilt-up construction. Shep Cure & Tilt Plus WB is free of silicones, resins and waxes. Panels will lift clean and free of resin staining. Organic compounds in Shep Cure & Tilt Plus WB react with the free limes in the concrete, producing gels that form a water impermeable barrier.
^ Back to Top

 

ARKANSAS

Sherwood
5900 Wadley Rd.
(501) 834-9300

Springdale
500 E. Henri de Tonti Blvd.
(479) 306-4370

ARIZONA

Phoenix
601 South 19th Ave.
(602) 257-0993

Tucson
1500 E. Benson Hwy.
(520) 746-3177

CALIFORNIA

Riverside
2631 S. Riverside Ave.
(909) 873-0909

COLORADO

Denver
6665 N. Washington St.
(303) 287-7531

FLORIDA

Jacksonville
1048 Escambia St.
(904) 766-7913

Orlando
3923 Forrestal Ave.
(407) 852-5886

Tampa
1201 N. 34th St.
(813) 248-5959

IDAHO

Boise
2600 S. Liberty Rd.
(208) 362-3700

LOUISIANA

Alexandria
4212 N. Bolton Ave.
(318) 448-4448

Baton Rouge
18909 Highland Rd.
(225) 751-4000

Bossier City / Shreveport
4908 Hazel Jones Blvd.
(318) 549-0505

Lake Charles
3310 E. Napoleon
(337) 625-2530

New Orleans
600 St. George St.
(504) 734-7000

MISSISSIPPI

Biloxi / Gulfport
10380 Auto Mall Pkwy.
(228) 863-9998

Jackson
1851 Country Club Dr.
(601) 922-7140

NEW MEXICO

Albuquerque
2300 First St. NW
(505) 247-4344

OKLAHOMA

Tulsa
5460 S. Garnett Unit B
(918) 641-2555

SOUTH CAROLINA

Charleston
2740 Azalea Dr.
(843) 745-0054

Columbia
500 Huger St.
(803) 779-4116

Greenville
2420 S. Hwy 14
(864) 879-4480

TEXAS

Amarillo
99 N. Tyler
(806) 373-4205

Austin
4123 Todd Lane
(512) 441-7505

College Station
10650 SH 30
(979) 774-5900

Conroe
2309 N. Frazier
(936) 441-4450

Corpus Christi
301 45th St.
(361) 883-0301

Dallas
2323 Irving Blvd.
(214) 631-6699

El Paso
1000 Pendale
(915) 599-2459

Fort Worth
2400 NE 36th St.
(817) 838-6811

Houston - South
9103 E. Almeda
(713) 799-1150

Houston - Northwest
7063 Fairbanks North Houston
(713) 896-9499

Lubbock
513 32nd St.
(806) 741-1150

McKinney
2202 McKinney St.
(972) 838-9050

Rosenberg
3243 Hwy 59
(281) 341-6900

Round Rock
16709 Central Commerce Dr.
(512) 246-1424

San Antonio
4911 Whirlwind Dr.
(210) 656-3010

San Antonio - West
10874 Leslie Rd.
(210) 695-8400

Texas City
3430 First Ave. South
(409) 945-3443

UTAH

Salt Lake City
1551 Pioneer Rd.
(801) 972-8777
Site Map | Contact Us | Home | © 2009 Commercial Metals Company. All rights reserved.